奇米777米视频|玩具在线一区二区|婷婷影库男人天堂|肉漫黄色在线日韩|妖精视频国产无码|国产久草视频真人在线观看|国产精品无码午夜在线免费看|久青草视频免费在线|免费av免播放器|日韩欧美日本第一页在线

a.Cut off protective films for 5 to 10mm before inserting PC sheets to the support frame, because the protective films would cause inefficient adhesive between tamping and PC sheets.
b.Since the expansion and contraction degree of PC sheets, are different from that of medal frames, as well as PC sheets are flexible and taking air pressure, therefore, appropriate insertion, reserving space for expansion and shrink because of temperature changes, and choosing suitable thickness of PC sheets are necessary.General plate should be inserted into fixed frame for over 25mm, with at least 2 ribs installed into the fixed zone. 3mm place will be reserved for expansion or shrinkage. (Expansion ratio: 0.065mm/m)

(2)Screw installation

a. When hollow profile and solid sheet are installed with screw installation, all rivet holes should be reamed to reserve space for expansion and contraction. Usually, the holes should be larger than that of the bolt or rivet stems by 50%" so as to avoid expansion or shrinkage. 
b. Fill up the holes, and cover the exposed portion with silicone compound to prevent detergents permeating which brings damage to pc sheets, and avoid gradual cracks.
c. Rivet heads should be larger than the stems by 2 times. Use gaskets or washers to avoid the rivet heads touching pc sheets, and reduce the pressure.
d. Do not screw into too tightly.
e. Do not use gaskets made of PVC.
f. The bending part should be avoided using screw for cold bending process.